Pulling tool, extractor (not specified)
No results were found for the filter!
Hazet Pole and battery terminal puller, 3-arm 1785-60
Handle, robust design with forged hooks Application: To pull off small parts such as battery terminals, ball...
Catalogue no.: 115498
Article no.: HAZ1785-60
Man.-art.-no.: 1785-60
€68.01 *
Hazet Ball bearing puller set 1778-3/40 - Number of...
Significantly easier handling than known commercially available systems enables even higher effectiveness and...
Catalogue no.: 115484
Article no.: HAZ1778-3/40
Man.-art.-no.: 1778-3/40
€1,212.35 *
Hazet Bearing inner ring puller set 4931-1/8 - Number of...
Particularly suitable for bearing inner rings, which lie directly against the wheel hub Application: To pull off the...
Catalogue no.: 115638
Article no.: HAZ4931-1/8
Man.-art.-no.: 4931-1/8
€966.26 *
Hazet Universal puller, 3-arm 1789-22
Removable puller hooks on both sides with a narrow side for tight spaces Application: For pulling off gears and ball...
Catalogue no.: 115526
Article no.: HAZ1789-22
Man.-art.-no.: 1789-22
€215.76 *
Hazet Commercial vehicle pivot wrench 4937-62 - Square...
For rear axle MERCEDES-BENZ For rear axle nuts MERCEDES-BENZ Actros, Atego (heavy duty): LN2, SK Rear axle: 740.0/9 -...
Catalogue no.: 115675
Article no.: HAZ4937-62
Man.-art.-no.: 4937-62
€331.19 *
Hazet Ball joint puller 1779-37
Application: To push out the ball joint pins on tie rods, stabilizers, etc. Dimension a = mouth opening Surface:...
Catalogue no.: 115491
Article no.: HAZ1779-37
Man.-art.-no.: 1779-37
€162.16 *
Hazet Extensions (in pairs) 1775N-012 - Total length: 100 mm
Per pair Surface: burnished, oiled Made In Germany For 1775 N-12 and -16 Overall length: 100 mm Net weight: 0.27 kg
Catalogue no.: 115480
Article no.: HAZ1775N-012
Man.-art.-no.: 1775N-012
€19.98 *
Hazet Thrust washer 4930-64
Made In Germany For bearing outer Ø 64 - 66 mm Net weight: 0.12 kg .
Catalogue no.: 115623
Article no.: HAZ4930-64
Man.-art.-no.: 4930-64
€45.98 *
Hazet Threaded spindle 230 mm long 4935-44-M20
Thread spindle 230 mm long Net weight: 0.6 kg .
Catalogue no.: 115667
Article no.: HAZ4935-44-M20
Man.-art.-no.: 4935-44-M20
€151.39 *
Hazet Adapter ring 80 x 13.5 4925-32
Adapter ring Ø 80 x 13.5 mm Net weight: 0.15 kg
Catalogue no.: 115563
Article no.: HAZ4925-32
Man.-art.-no.: 4925-32
€29.44 *
Hazet Slide hammer 1788T-1 - Total length: 226 mm
Application: For disassembly of tight-fitting common rail injectors without disassembly of the cylinder head Made In...
Catalogue no.: 115524
Article no.: HAZ1788T-1
Man.-art.-no.: 1788T-1
€31.38 *
Hazet Centering sleeve 4930-43X45
Made In Germany For bearing inner Ø 43 / 45 mm Net weight: 0.37 kg .
Catalogue no.: 115619
Article no.: HAZ4930-43X45
Man.-art.-no.: 4930-43X45
€56.32 *
Viewed