Pulling tool, extractor
No results were found for the filter!
Hazet Beam puller 1774-1 Forged, hardened and tempered tension hook Application: For tensioning, pulling, compressing wood Spar tension Hook...
Catalogue no.: 115479
Article no.: HAZ1774-1
Man.-art.-no.: 1774-1
€191.39 *
Hazet Stud extractor set 844/5 - Square hollow 12.5 mm... SmartCase (1/9) 165-S Safety insert system, 2-component soft foam insert. Inlay also suitable for HAZET Assistant...
Catalogue no.: 115744
Article no.: HAZ844/5
Man.-art.-no.: 844/5
€149.57 *
Hazet Mechanical nut splitter 847-1027A Application: For blasting nuts of grade 5 and 6 Made In Germany Net weight: 0.31 kg
Catalogue no.: 115716
Article no.: HAZ847-1027A
Man.-art.-no.: 847-1027A
€89.20 *
Hazet Mechanical nut splitter 847-0410A Application: For blasting nuts of Grade 5 and 6 Made In Germany Net weight: 0.28 kg
Catalogue no.: 115715
Article no.: HAZ847-0410A
Man.-art.-no.: 847-0410A
€86.79 *
Hazet Ball joint puller 1779-37 Application: To push out the ball joint pins on tie rods, stabilizers, etc. Dimension a = mouth opening Surface:...
Catalogue no.: 115491
Article no.: HAZ1779-37
Man.-art.-no.: 1779-37
€166.92 *
Hazet Spindle set 4925-67/2 - Total length: 259 mm -... Motion thread on spindle and axial groove bearing of the compression nut cause high tensile and compressive...
Catalogue no.: 115577
Article no.: HAZ4925-67/2
Man.-art.-no.: 4925-67/2
€117.62 *
Hazet Universal ball joint puller 1790-7 Application: For pushing out the ball joint pins on tie rods, stabilizers etc. For FORD, BMW, Volvo, TOYOTA, OPEL,...
Catalogue no.: 115535
Article no.: HAZ1790-7
Man.-art.-no.: 1790-7
€149.75 *
Hazet Separator 1775N-115 Tensioning of the separator is done by evenly tightening the nuts on the side bolts Surface: galvanized/burnished...
Catalogue no.: 115748
Article no.: HAZ1775N-115
Man.-art.-no.: 1775N-115
€151.18 *
Hazet Double silent bearing tool set 4925-2510/9 - Number... For the removal and installation of the double-silent bearing in the aggregate carrier AUDI : A3, Q3,TT Bj. 2003 ->...
Catalogue no.: 115558
Article no.: HAZ4925-2510/9
Man.-art.-no.: 4925-2510/9
€420.45 *
Hazet Ball joint puller 1779-27 Application: For backing out the ball joint pins on tie rods, stabilizers, etc. Dimension a = mouth opening Surface:...
Catalogue no.: 115489
Article no.: HAZ1779-27
Man.-art.-no.: 1779-27
€92.76 *
Hazet Bolt extractor set 841/25 - Number of tools: 25 Application: To unscrew stripped threaded bolts and screws 6 to 15 mm Ø Plastic box Surface: burnished, oiled 25...
Catalogue no.: 115738
Article no.: HAZ841/25
Man.-art.-no.: 841/25
€154.34 *
Hazet Inner extractor 1788N-15 Application: For extracting ball bearings, ball bearing outer rings and bushings Together with counter support device...
Catalogue no.: 115703
Article no.: HAZ1788N-15
Man.-art.-no.: 1788N-15
€59.62 *
Viewed