Haimer | Wetec

Products of Haimer

10 Item found

Produktanzeige:

Probe insert probe ball D.8 mm

(100+)

Replacement key insert for 3D probe (analog/digital)

€51.80*

Subscription

In Stock

Haimer Taster-3D-Digital Schaft 20 mm

(1+)

Digitaler 3D-Taster - Die Spindel bzw. der Senkkopf können schnell und sicher an Bezugskanten positioniert werden - Anfahrvorgang kann auf Digitaluhr genau verfolgt werden - 0-stellung wird auf Anhieb gefunden - Ohne Rechnung kann dass Messsystem der Maschine genullt werden, da die Spindelachse direkt an der angetasteten Kante steht - Die Digitaluhr verfügt über eine 0,001-mm-Anzeige mit großen Ziffern - Spritzwasser- und staubgeschützt (IP 64), kann im Werkzeugmagazin der Maschine abgelegt werden - Weiterentwicklung des bewährten mechanischen 3D-Taster - Zum Antasten von Werkstücken auf Fräs- und Erodiermaschinen (isolierter Tasteinsatz) - Schutzart IP 64 Lieferung: Mit kurzem Tasteinsatz Durchm. Ø 4 mm. Technische Daten: Schaft-Durchm. Ø: 20 mm Tastkugel-Durchm. Ø: 4 mm Genauigkeit: 0,001 mm Gehäuse-Durchm. Ø: 65 mm Länge ohne Einspannschaft: 113 mm Wiederholgenauigkeit: 0,001 mm Messgenauigkeit: 0,005 mm Gewicht: 777 g Art.-Nummer: DVE4034221006929 Shop-Nummer: DVE4034221006929

€664.35*

Subscription

In Stock

Zero Master analog shaft 10 mm

(250+)

Analog 3D probe Zero Master - Smallest 3D probe in the world - The spindle axis is positioned exactly at workpiece or fixture edges - The probing direction is arbitrary (X, Y, Z axis) - The analog dial gauge always deflects in the same direction and shows the distance between spindle axis and workpiece edge - Once the display is at zero, the spindle axis is located at the first go, without long trying, without calculation, without sign problems - This reduces ancillary costs, increases productivity and relieves the employees - Clamping shank-Ø 10 mm, thus also applicable on machines with SK 30 or with small HSK spindles - Even large workpieces can be measured due to the shortened housing - The probe insert can be changed without tools - A recalibration of the probe is not required - Additional safety due to the enlarged traverse path and the nominalBreak point in the probe insert - For highest measuring accuracy, all universal 3D probes are individually measured and tuned during assembly - Can be equipped with short (ball Ø 4 mm) and long (ball Ø 8 mm) probe insert - For setting workpiece zero points and length measurements on milling and EDM machines (insulated probe insert), Centering and averaging of bores and shafts - Protection class IP 67 Supply: polystyrene outer box, short probe insert Ø 4 mm.

€397.68*

Subscription

In Stock

Probe insert for centering device straight

(1+)

Spare key insert for Centro precision centering device

€40.61*

Subscription

In Stock

Precision centering device Centro 6-125 mm

(100+)

Precision centering device Centro - At slow speed, the spindle is brought close to the searched axis - The probe insert slides along the wall of the bore resp. of the shaft - As long as spindle and searched axis do not coincide, the probe insert deflects during rotation and transmits the movement to a large dial gauge - The dial gauge does not rotate with the spindle and thus always remains in the operator's field of view - No adjustment is necessary - Housing-Ø 80 mm - Dial gauge-Ø 60 mm - Length without clamping shank 140 mm - Clamping is via shank-Ø 16 mm - Concentricity errors of the spindle and the clamping are compensated - For centering bores and shafts centrically to the work spindle Delivery: In carton, including straight probe insert Ø 5 mm.

€456.82*

Subscription

In Stock

Probe insert for centering device curved

(1+)

Spare key insert for Centro precision centering device

€50.54*

Subscription

In Stock

Pushbutton 3D Universal SK40 D69871 Haimer

(1+)

Universal 3D probe, IP 67 Clamping device - Protection class IP 67 - Probe insert change without tools and without recalibration - The approach direction is arbitrary (X-, Y-, Z-axis) - Safety due to increased traverse path of proven predetermined breaking point in the probe insert - For setting workpiece zero points and length measurements on milling and eroding machines, as well as for centering and averaging bores and shafts Delivery: With short probe insert Ø 4 mm Note: The probe inserts of the new generation also fit into the existing universal 3D probes.

€427.09*

Subscription

In Stock

Probe 3D Universal Shank 20 mm

(250+)

Analog 3D probe - Very precise and versatile measuring device - Is clamped into the milling spindle resp. the countersink head and allows the spindle axis to be positioned exactly at workpiece or fixture edges - This makes it quick and easy to set workpiece zero points and take length measurements - The probing direction is arbitrary (X, Y, Z axis) - The dial indicator always deflects in the same direction and shows the distance between the spindle axis and the workpiece edge - Once the display is at zero, the spindle axis is located right away, without long trial and error, without calculating, without sign problems - This reduces ancillary costs, increases productivity and relieves employees - The stylus can be changed without tools - Additional safety due to the increased traverse path and the predetermined breaking point in the stylus - For maximum measuring accuracy, all universal 3D probes are individually measured and tuned during assembly - For probing workpieces on milling and eroding machines (insulated stylus) - Protection class IP 67 Supplied: With short probe insert Ø 4 mm.

€375.90*

Subscription

In Stock

Haimer Tasteinsatz Tastkugel D.4 mm

(100+)

Ersatz-Tasteinsatz für 3D-Taster (analog/digital) Technische Daten: Länge: 27 mm Kugel-Durchm. Ø: 4 mm Gewicht: 14 g Art.-Nummer: DVE4034221006868 Shop-Nummer: DVE4034221006868

€33.16*

Subscription

In Stock

Taster 3D New Generation Schaft 12mm HAIMER

(10+)

€397.68*

Subscription

In Stock