Pösamo Wire rope galvanized 2.0 mm roll 500 m (250 x 80)

Galvanized Wire Rope, Coil Goods

- Consisting of best wire rope with nominal strength 1770 N/mm²,
- Low twist and stress free
- According to EN 12385-4

Low twist and stress free wire ropes and their advantages
1. The strands of the ropes are preformed. Cut ropes maintain their position without the need to tie the side at the
point of cut.
2. Since all strands are uniformly stretched, the load is evenly distributed among all individual wires in the rope.
3. The ropes have little tendency to form sidewalls.
4. The unloaded wire rope is stress-free because the wires have no preload. The ropes therefore show little tendency to twist under load.
5. The ropes are
characterized by quite exceptional flexibility.
6. Low-twist and tension-free ropes have a significantly increased service life compared to normal wire ropes.

Calculation of the load capacity:
The load capacity of wire ropes is calculated from the minimum breaking load. This is divided by the safety factor prescribed for the particular
application.


Supporting force = **Minimum breaking load
6 (safety factor)


*Construction:
A wire rope consists of a number of strands, which in turn consist of a number of wires. Furthermore, fiber inserts (Fe) are integrated to support the strands, to reduce vibrations in the wire rope, and to hold lubricants.
c. B.:
5 x 7 + 1 Fe -+gt, 5 strands with 7 wires each and 1 fiber core


Important note:
The wire ropes may only be used in accordance with the accident prevention regulations and the related EN standards, e.g. 12385-4, 13414 and 15020.