presto aluminum filler 250 g
presto aluminum filler 250 g
€73,100.52*
Content:
0.25 kilogram
Item Number:
DVE4052800600351
presto aluminum filler 250 g
EAN-Nr.:
4052800600351
Zur Produktbeschreibung
€73,100.52*
Content:
0.25 kilogram
(€292,402.08* / 1 kilogram)
(25+)
In Stock, Delivery in approx. 1 to 3 business days
presto aluminum filler 250 g
presto Alu-Spachtel
Two-component polyester metal filler, as a mixture of a medium-elastic, highly reactive, amine pre-accelerated polyester resin with various environmentally friendly fillers and aluminum pigments (asbestos and silicone-free), highly thixotropic, therefore particularly good large-area and pore-free formability.
Filler filler for the automotive repair sector, mechanical engineering and for hobby work. Everywhere where large-area drawability is required. Substrates such as metal, wood, various plastics or concrete can be filled effortlessly in the required layer thickness. Holes are filled and leveled, thin areas are stabilized. Sandable after approx. 20-30 minutes.
- Pot life at 20 °C: approx. 4-5 minutes
- Flash point: approx. 33 °C
- Density at 20 °C: 1.75 g/cm³,
- Hardener addition: 2.5 %
- Temperature resistance of the cured material: up to 120 °C
- Resistant to: acids, alkalis, propellants, solvents, water and de-icing salts
- Color: gray
- High elasticity, good adhesion, easy sanding.
Two-component polyester metal filler, as a mixture of a medium-elastic, highly reactive, amine pre-accelerated polyester resin with various environmentally friendly fillers and aluminum pigments (asbestos and silicone-free), highly thixotropic, therefore particularly good large-area and pore-free formability.
Filler filler for the automotive repair sector, mechanical engineering and for hobby work. Everywhere where large-area drawability is required. Substrates such as metal, wood, various plastics or concrete can be filled effortlessly in the required layer thickness. Holes are filled and leveled, thin areas are stabilized. Sandable after approx. 20-30 minutes.
- Pot life at 20 °C: approx. 4-5 minutes
- Flash point: approx. 33 °C
- Density at 20 °C: 1.75 g/cm³,
- Hardener addition: 2.5 %
- Temperature resistance of the cured material: up to 120 °C
- Resistant to: acids, alkalis, propellants, solvents, water and de-icing salts
- Color: gray
- High elasticity, good adhesion, easy sanding.
Eigenschaften
| Weight | 360 g |
|---|---|
| Content | 250 g |
| Shopnr | DVE4052800600351 |
Documents for download
| Safety datasheet | Download |
|---|
Details of the manufacturer: