DIN 933 hexagon head bolts with thread to head, A2 stainless steel * Width across flats according to ISO. Prices possibly plus alloy surcharge according to current information.

EU all-purpose grease E-COLL - Adheres reliably without dripping - Protects metals from corrosion - Permanently lubricates threads, hinges, locks, etc. - Resin and acid-free

Electrical insulating tape - VDE and ÖVE certified according to type test IEC 60454-3-1-10/F-PVCp/105 - For all standard insulation work in the electrical field - Also for repairs and for colored marking and bundling universally applicable - High-quality soft PVC film, combined with an aging-resistant pressure-sensitive adhesive on acrylate base

Wire rope, stainless steel 1.4401, in rings - Consisting of best wire rope made of stainless steel 1.4401 / AISI 316 - Low twist and tension free - According to EN 12385-4 Low twist and tension free wire ropes and their advantages 1. The strands of the ropes are preformed. Cut ropes maintain their position without the need to tie the side at the interface. 2. Since all strands are uniformly stretched, the load is evenly distributed among all individual wires in the rope. 3. The ropes have only a slight tendency to form pitches. 4. The unloaded wire rope is stress-free because the wires have no preload. The ropes therefore show little tendency to twist under load. 5. The ropes are characterized by quite particularly high flexibility. 6. Low-twist and tension-free ropes have a significantly increased service life compared to normal wire ropes. Calculation of the load-bearing capacity: The load-bearing capacity of the wire ropes is calculated from the minimum breaking load. This is divided by the safety factor prescribed for the particular application. Supporting force = **Minimum breaking load 6 (safety factor) *Construction: A wire rope consists of a number of strands, which in turn consist of a number of wires z. B.: 7 x 7 -> 7 strands with 7 wires each Important note: The wire ropes may only be used in accordance with the accident prevention regulations and the related EN standards, e.g. 12385-4, 13414 and 15020.

T-connector - Quick connector series made of plastic or nickel-plated brass - The parts can be used in conjunction with plastic hoses and copper pipes - With O-ring - Application: air, vacuum - Material: plastic or brass nickel-plated - Pressure ring: plastic - Working pressure: max. 15 bar, rough vacuum - Temperature range: -20 °C to +80 °C - Sealing surface: O-ring in housing for cylindrical version - PTFE thread coating for conical version - Medium: compressed air, gases, liquids, as far as compatible with the materials - Recommended hose: PU or PA Note: Further dimensions can be found online in our procurement service portal or on request.